What happens after installation, who else uses JETCAM and other issues
Q. Can I use my existing PC's?
Yes, as long as it confirms to minimum specifications set out bellow (many JETCAM dealers can also supply you with PCs, both for JETCAM Expert nesting software and for your DNC link software to the machine tool(s) on the shop floor).
Q. What specification of PC will I need to run JETCAM?
All versions
of JETCAM will run well on a Pentium II class PC with
128MB RAM running Windows 2000, XP or Vista. We no longer support NT4. Minimum specification
would be a Pentium III machine with 256MB of RAM and
64MB graphics card. JETCAM Expert takes up less than 100MB
of hard disc space, unless you wish to install the Video
Help files, which will require several hundred megabytes.
Q. My PC crashed and I need to reinstall the JETCAM dongle drivers - where can I get them.
You can get them from our dongle driver page here.
Q. Will JETCAM work with my CNC machines?
Almost certainly yes,
even with older machines. You can view a general list
of supported punching, laser, plasma, waterjet, routing and composite cutting machines online.
Many machine accessories (such as loaders, RAS) are
also supported. If you would like further confirmation,
contact your local office.
| Personnel |
Q. How long does training normally take?
Usually less
than two days and can be much quicker depending on your
operators existing CAD/CAM experience. JETCAM's F2 Video
help will ensure that additional training is not required by allowing users to obtain immediate context sensitive audio/visual assistance. Read more about JETCAM's training here.
Q. Where does training take place?
At one of JETCAM's designated training centres, locations
available worldwide. Alternatively, optional on-site training is available.
Q.
What is the lead-time from order placement to installation?
This
varies from dealer to dealer, but usually is around two
weeks.
Q. Can I use my existing programs with JETCAM?
Yes.
These can be stored in JETCAM's CNC Program database
and recalled at will. JETCAM also integrates well with
your existing CAD package. Many CAD packages have an automatic
link into JETCAM, generating NC code within seconds.
Q. Who else is using JETCAM?
Many
world-class companies, including ABB, Bombardier, Embraer, Electrolux, Ericsson,
Hitachi, Volvo and Chrysler.
Several Formula 1 manufacturers also rely on JETCAM. Many machine tools are supplied with JETCAM Expert software installed as standard.
Q. What does maintenance include?
Maintenance entitles you to unlimited technical support by your supplier,
both over the phone and via Internet. You will also be
entitled to receive regular User Updates of relevant JETCAM
products, either by requesting update CDs or downloading
new versions directly from our website. As JETCAM constantly
improves and updates its products, this on its own delivers
huge benefits.
Q. What if I have a problem - what's the procedure?
JETCAM
is confident that you are likely to have little or no
requirement to call for technical support, as, once configured
correctly, all JETCAM systems will continue to work faultlessly.
In the unlikely event of a problem however, we offer several
methods of service. Please contact your reseller for further information.